Skip to main content
FREE Delivery!|(501) 596-6225

Pope County, Arkansas ยท Free Delivery

Fill and Base Material Delivered in Russellville, AR

Free delivery to Russellville on every order, with loads arriving in as fast as 2 business days.

Delivering to Russellville, AR

Free delivery on every order.

  • Free delivery to Russellville
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Russellville

Crushed gravel and base materials that compact under tires.

SB-2 Base

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Russellville

Rock & Stone delivered to Russellville

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Russellville

Decorative delivered to Russellville

Rounded stone for beds, borders and water features.

Sand delivered to Russellville

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Russellville

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Russellville

How delivery to Russellville works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Russellville.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Russellville addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

If you need gravel and aggregate delivery in Russellville, AR, the first question is usually what to put under the slab, pad or drive. Arkansas Rock Supply sells bulk fill, SB-2 base and drainage stone by the ton, delivered to your site.

This part of the Arkansas River Valley sits on deep silt loam and clay. That ground moves when it stays wet, so what goes under your project matters as much as what goes on top.

Delivery to Russellville and the Surrounding Area

You order online, choose a quantity by the ton or by the yard, and pick a delivery date at checkout. Each product page has a calculator if you want to size the load before you commit.

A dump truck arrives and tips the material on site in one pile. From there it is yours to move and place where the work needs it.

Arkansas Rock Supply delivers across Russellville and Pope County, including Pottsville, Atkins, Dover, London and Hector. Rural and county-road properties are served the same way as in-town addresses.

Materials for Russellville Projects

Raising grade and building a pad is the job that sets up everything after it. On wet valley clay, fill dirt goes down first to lift the pad out of the water, then a compacted base course goes on top.

For that base, SB-2 base is the standard Arkansas material: a dense-graded 1 1/2 inch minus crushed stone with the fines left in, so it locks up under a roller. Engineers and city standards often write the same material as Class 7 base, and it is specified that way on street, sidewalk and parking work.

For a driveway, start with Fill Dirt where the grade is low, then cap it with SB-2 Base or Driveway Gravel for the running surface. Where a written spec calls for a tighter 1 inch minus, Crusher Run is the dense-graded option.

For a patio or walkway, bed the pavers on Screenings, the Arkansas trade name for crusher fines. Screenings pack tight and give you a firm surface for flagstone, brick and pavers.

For a drain, #57 Limestone is the washed workhorse size for French drains, foundation and pipe drainage. 3/4" Crushed Stone covers drainage beds and construction entrances, and Drain Rock handles dry wells and downspout runs.

Ground and Conditions in Russellville

Across the Arkansas River Valley, the ground runs to deep silt loam and clay on the bottoms and terraces, with shale and sandstone uplands between them. Clay subsoil lets go of water slowly, so a base built thin over it will soften and pump under traffic.

Flat bottomland also sits close to the water table, and backwater after heavy rain upstream keeps those soils wet well into spring. Fill and sub-base depth is what lifts a pad above that, which is why the grade work comes first.

Spring thunderstorms also sheet water off bare valley clay and scour banks along the river and its lakes. RipRap armors slopes, culvert outlets and ditch checks where moving water is the problem.

Work runs nearly all year here. A wet late winter and spring is the real limit, and summer heat can dry a surface before it can be rolled.

Order SB-2 Base and Fill for Your Russellville Project

SB-2 base is the Arkansas material that ties a Russellville pad, drive or parking area together, and fill dirt is what gets the grade up out of the wet first. Order online, size your load with the calculator, and pick your delivery date at checkout.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Russellville, AR

What is the best base under pavers in Russellville?

Screenings, also called limestone fines or crusher fines, are the bedding material for pavers, flagstone and brick. They pack tight and hold a level surface. Under the bedding, a compacted SB-2 base gives the pavers something solid to sit on, which matters on clay ground that softens when wet.

Do you supply contractors working in Russellville?

Yes. Arkansas Rock Supply sells bulk aggregate to contractors and homeowners alike, ordered online by the ton or by the yard. Class 7 base is available under the same product as SB-2 base for work that follows a written city or engineering standard. Delivery covers Russellville and the rest of Pope County.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.